Re-coating frequency of Waterlox Original Tung oil finishes.

Waterlox Original Tung oil finishes are penetrating oil finishes, that when applied and allowed to dry as per our recommendations will form a film that is tough enough to be used and walked/worked on.

Re-coating will depend on wear, use and type of use. One of the many benefits to using a Waterlox Original Tung oil finish is that you can clean the floor with TSP (trisodium phosphate) and water, perform a clear water rinse, let dry completely and reapply more of the Waterlox Original Tung Oil finish that was your last coat.

To spot repair and maintain other more used areas, please refer to our Repair, Restore and Re-Coat FAQ.

Back to Listing

Looking for Help?

VOC vs Traditional

VOC Compliant vs. Traditional Formulations

View

marine_guide.jpg

Waterlox Marine Application Guide

View

truetone_guide.jpg

Waterlox TrueTone Finishing Guide

View

floor_finishing_guide.jpg

Waterlox Floor Finishing Guide

View