Guide2-Problem Wet

Waterlox® application in low temperatures.

|

There are two main processes when using a coating, which are both affected by temperature. Namely, application and wetting of the surface; and, drying and curing the film. Application and Wetting: Surface, Product and Room Temperature: During application of Waterlox® wet-applied finishes (ORIGINAL, H2OLOX®, URETHANE or MARINE), the product, project surface and environment should be close … Waterlox® application in low temperatures.

Puddles / Puddling causes.

|

Our recommended spread rate for Waterlox Original Tung oil finishes is 500 square feet per gallon per coat (125 square feet per quart per coat). The number of coats applied is dependent upon the hardness of the wood (review the wood hardness FAQ (Janka Chart). When the finish is applied as per our product application … Puddles / Puddling causes.