Surface preparation is one of the most important steps when refinishing wood. Waterlox Original Tung oil finishes are penetrating oil finishes and should therefore be applied to bare wood (does not refer to stain coat(s) if used). If you have brand new – never coated wood surface, a simple sand, vacuum, tack and coat is … Application over previously finished surfaces.
Tung oil is a main ingredient in almost all Waterlox products (excluding URETHANE). Because tung oil is a naturally occurring oil from the tung tree, there are occasional concerns about allergies to Waterlox products. There is no guarantee that a person may be allergic or sensitive to some ingredient in Waterlox products, however the possibilities … Allergies and Waterlox®
Your project may require the use of liquid adhesives for initial or final assembly. There are a wide variety of adhesives available and it is important to read all instructions and use the proper adhesive for the task at hand. Adhesives before Finishing Many projects are fully assembled and sanded prior to being finished. Using … Adhesives and Waterlox®
Adhesion is one of the most critical features of any coating. Adhesion is defined as the action or process of adhering (sticking) to a surface or object. Basically, how well does the new coating stick to either the substrate (the actual wood or other surface you are coating) or the previous layer (a.k.a. intercoat adhesion). … Adhesion: Cross-Hatch Test
Using wood for floors, countertops, furniture and other projects can be quite rewarding. Typically, applying the finish to the wood is the last step in what can be a lengthy (and expensive) process, so it is important to take the time and care that are necessary to get a good end result. Following are 5 … 5 Tips for a Successful Finish
Waterlox Coatings Corporation | 9808 Meech Avenue, Cleveland, OH 44105 | (800) 321-0377 | © 2024 Waterlox Coatings Corporation Co. All rights reserved.
