All Waterlox products are air-dry products. No hardeners, cross-linkers or heat are needed to properly cure or dry any Waterlox products. The only critical ingredient in the curing process is oxygen. When applying finishes, there are two steps to the drying and curing process. This guide will specifically focus on time and air movement, but … Drying, Ventilation, Curing and Circulation
One of the major challenges with exterior film forming coatings is that when they tend to fail, they will start to crack, chip and peel off the surface leaving the wood exposed. The Waterlox MARINE Sealer penetrates into the wood and chemically bonds with the MARINE Finishes to create a single film layer that is … Do I really need the Marine Sealer?
A common question asked is: I’ve heard that the Marine Sealer and the Original Sealer & Semi-Gloss Finish are the same product, so do I need the Marine Finishes? The initial statement is true. Waterlox MARINE Sealer (TB 3809) and Waterlox ORIGINAL Sealer & Semi-Gloss Finish (TB 5284) are the same product with different labels … Do I need to use a Marine Finish with the Marine Sealer?
A common question asked is: I have the ORIGINAL Satin Finish and the instructions say to start with the ORIGINAL Sealer & Semi-Gloss Finish, TRUETONE Stain or UTOS. Is that necessary? Because the ORIGINAL Satin Finish is a finish to be used on wood surfaces for a satin sheen, a Waterlox Sealer should be used … Do I have to use Original Sealer & Semi-Gloss Finish before Original Satin Finish?
In this instance, decorative finishes are considered to be “colorization” processes beyond the use of wood stain. This is most often solid paints for lettering, logos, pictures, etc. Some users will even use vinyl decals or logos that they then want to seal under the protective layer. Many options are compatible with Waterlox products, but … Decorative Finishes: Paint, Decals, etc.
The origin of our name, Waterlox, stands for “locks out water.” Therefore, we think our Waterlox ORIGINAL finishes are the perfect solution for any and all wood finishing project(s). When you add to that your plans to finish a known water-related area like a bathroom, kitchen, counter top or table top, we think Waterlox should … Countertops and Waterlox Original Tung oil finishes.
Waterlox ORIGINAL Sealer & Semi-Gloss Finish is a solution for concrete countertops; however, the number of coats may vary due to the differing levels of porosity in concrete products. Most projects will required between 3 and 4 coats of Waterlox ORIGINAL Sealer & Semi-Gloss Finish. The concrete should be allowed to cure for 30 days … Concrete countertops and Waterlox® tung oil finishes.
The origin of our name, Waterlox, stands for “locks out water.” Therefore, we think our Waterlox Original Tung oil finishes are the perfect answer for any and all wood finishing project(s). When you add to that your plans to finish a known water-related area like a bathroom or kitchen, we think we should be the … Bathroom and Kitchen Moisture and Waterlox Original Tung oil finishes.
When finishing larger projects, such as floors, you may need to use multiple cans of product for one coat. When more than one can is needed per coat, it’s always best to blend all necessary cans together in a suitable container (i.e. a 5-gallon bucket) before starting the job. This is called batching and will … Batching of Waterlox® Products on Large Projects
Waterlox ORIGINAL products are compatible with 100% PURE Tung Oil; provided the PURE Tung Oil has been applied and cured for over 30 days. If unsure, one method of testing for PURE Tung oil is to apply a drop of ammonia to a small, inconspicuous area. Cover the drop with something hollow to prevent the … Applying Waterlox ORIGINAL finishes over 100% Pure Tung Oil
Waterlox Coatings Corporation | 9808 Meech Avenue, Cleveland, OH 44105 | (800) 321-0377 | © 2024 Waterlox Coatings Corporation Co. All rights reserved.
