This is a general reference guide for using Waterlox products in conjunction with other types of finishes. There are always some exceptions and proper testing should always be done when combining different brands and types of finishes. See the “Mixing and Matching” section in the Types of Finishes guide for more information about testing for … Quick Guide: Waterlox® and Other Finishes
The ideal method for adhesion testing is the Cross Hatch Test as described in our Adhesion: Cross Hatch-Test guide. Cutting a small grid can be a little challenging, so the use of an X pattern can be a quick way to check coating adhesion. The Test Required Items Specimen to be tested – Properly applied … Quick Adhesion Test: Cross-Scribe
In general, there are two types of finishes, film-formers and penetrating oils. Film-forming finishes tend to dry into clear, hard films regardless of the substrate that they are applied. Penetrating oils tend to dry slowly and into soft, cloudy films when applied to a non-porous surface (like glass) and work best when they can penetrate … Previously Finished with Non-Waterlox Products
Generally speaking, properly finished wood with Waterlox Original Tung oil finishes will stand up to casual pet accidents (e.g. wiped up immediately or soon after the accident occurs); however, we are unaware of any clear wood finish that will stand up to chronic accidents. Chronic accidents are those left unattended for longer periods of time … Pet urine and saliva and Waterlox Original Tung oil finishes.
To fix a pet accident, you will first need to determine if the accident has stained the finish coat(s) or stained the wood beneath the finish. By sanding the Waterlox finish, you can determine which it is. If the accident stained or changed the Waterlox, you will have to sand through the layers of Waterlox … Pet accident fix on a Waterlox Original Tung oil finished surface.
Clear wood finishes that protect outdoor surfaces with direct sun exposure face a very difficult task. The regular and chronic UV exposure and expansion and contraction of wood surfaces as the seasons and weather change, create a very difficult environment for coatings. Waterlox does offer the MARINE and PURE Tung Oil product lines that can work on … Outdoor Projects in Direct Sunlight
When finishing a project and selecting a finish, one important factor is the number of coats required to complete the project. The important thing to remember is that the number of coats is only half of the actual equation when it comes to finishing a project. The other half of that equation is spread rate. … Number of Coats for Your Project
Waterlox products do not contain any mold or mildew killing/controlling additives. If you are using our finishes in mildew prone areas (dark and damp), you may want to consider some mold/mildew prevention steps. Notable areas of concern would be some porch ceilings, exposed but shady areas on outdoor surfaces, underside of outdoor furniture, etc. Starting … Mold and Mildew and Waterlox
Our Marine finishing system is recommended for use outdoors in areas that have direct UV exposure. As the gloss begins to fade on the Marine Finish, this is the key to knowing that its time to re-coat. For the grey/darkened areas, you’ll want to wipe them with Mineral Spirits to determine if they turn black … Maintenance of Waterlox Original Marine Finish outdoors.
In general, all Waterlox products are permanent coatings. This means that they will not disappear on their own. With wear and tear, eventually all coatings will disappear and require some form of maintenance in their lifetimes. Interior Projects All of our interior products will produce long-lasting results. On projects like ceiling beams, fine/decorative furniture or … Lifespan and Recoating Frequency of Waterlox® Products
Waterlox Coatings Corporation | 9808 Meech Avenue, Cleveland, OH 44105 | (800) 321-0377 | © 2024 Waterlox Coatings Corporation Co. All rights reserved.
