Removing Waterlox Original Tung oil finishes from “unintended” surfaces.

Waterlox Original Tung oil finishes once dry are difficult to remove. If some has made its way to an unintended surface and has cured, we only know of a few ways in which to remove it.

Suggested methods for removal:

  1. Razor blade knife;
  2. Acetone (nail polish remover); and/or
  3. Chemical Paint Stripper.

Our suggested methods for removal may not be safe for the surface in which you are trying to remove the dried and cured Waterlox; therefore you should test first.

Back to Listing

Looking for Help?

VOC vs Traditional

VOC Compliant vs. Traditional Formulations

View

countertop_guide.jpg

Waterlox Kitchen, Bathroom & Countertop Guide

View

marine_guide.jpg

Waterlox Marine Application Guide

View

floor_finishing_guide.jpg

Waterlox Floor Finishing Guide

View