Cleaning and maintenance of a TrueTone finished surface.

After the Waterlox TrueTone Buff-In Tung Oil Finish has dried and cured for at least 7 days, cleaning may be performed.

Cleaning options are as follows:

Avoid ammonia-based or bleach-based cleaning products like Lysol®, Fantastik®, 409®, Windex® (ammonia and bleach-based products will soften the oil finish if used frequently).

Maintenance Tips
  • For small scratches not down to bare wood or into the color, clean the area well with regular mineral spirits (paint thinner), then simply rub Waterlox TrueTone Buff-In Tung Oil Finish into the scratch, wiping off any excess material surrounding that area. Two or more applications may be required to “fill” the scratch to the same film thickness as the surrounding area.
  • For scratches down to bare wood, apply the Waterlox TrueTone Color-Infused Stain color as the first coat and then build up with the Waterlox TrueTone Buff-In Tung Oil Finish.
  • For larger damaged areas, lightly sand with 150-220 grit sandpaper to clean-up the area. For bare wood, wipe Waterlox TrueTone Color-Infused Tung Oil Stain into the area and wipe off the excess. Repeat the application with Waterlox TrueTone Buff-In Tung Oil Finish until the area has been restored. The area being repaired will be slightly higher in sheen than the surrounding area, this is normal. The gloss will dissipate and blend in with the surrounding area within 7-14 days.
  • Avoid puddling of water for long periods of time; wipe up spills immediately.
  • For bathrooms, do not let soap sit directly on the finish; wipe up excess soap immediately.

Back to Listing

Looking for Help?

VOC vs Traditional

VOC Compliant vs. Traditional Formulations

View

drying_ventilation_guide.jpg

Dry time of Waterlox Original Tung oil finishes.

View

truetone_guide.jpg

Waterlox TrueTone Finishing Guide

View

woodworking_guide.jpg

Waterlox woodworking finishing guide.

View